refactor(hyprlua): move hypr-usr/ into hypr/usr/ and wire sysupdate sync

Device-specific Lua configs (monitors, binds, input, etc.) previously lived in a top-level hypr-usr/ sibling to hypr/. They now live inside hypr/usr/ so all hypr-related configs sit under one directory tree. - git mv hypr-usr/ → hypr/usr/ - hyprland.lua: require() calls updated to require("usr.*") - input.lua: require("input-device-exceptions") → require("usr.input-device-exceptions") - hyprpaper.conf + monitorhandler.sh + wallpaper-picker: wallpaper.conf path updated from ~/.config/wallpaper.conf → ~/.config/hypr/usr/wallpaper.conf - monitorhandler.sh: fix stale desktopenvs/hyprland/ → desktopenvs/hyprlua/ - binds.lua: edit-binds keybind path corrected to ~/.config/hypr/usr/binds.lua - helpmenu.sh: update binds.lua source path - updater.conf: SOURCE_BASE fixed (hyprland→hyprlua), config hypr except usr, remove flat hypr-usr entry - update-configs.sh: add "except <subdirs>" support for the config type - hyprlua.sh installer: remove now-redundant hypr-usr copy lines - migrate-hyprland-to-hyprlua.sh: deploy from hypr/usr/ instead of hypr-usr/ - sysupdate.sh: add CONFIG SYNC section with _migrate_hypr_usr() which moves old flat-layout files into usr/ (case 1) or copies fresh from dotfiles when no local config exists (case 2); fallback copy preserves hypr/usr/ Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
2026-06-11 15:46:01 +02:00 · 2026-06-11 15:46:01 +02:00 · 7fd0e37061
parent 9638fd337a
commit 7fd0e37061
21 changed files with 253 additions and 43 deletions
--- a/desktopenvs/hyprlua/config-updater/update-configs.sh
+++ b/desktopenvs/hyprlua/config-updater/update-configs.sh
@ -3,6 +3,14 @@
 #
 # Config:   ~/.config/config-updater/updater.conf
 # Manifest: ~/.config/config-updater/manifest
+#
+# Syntax in updater.conf:
+#   config <name> [except <sub1> <sub2> ...]
+#       copy SOURCE_BASE/<name> to ~/.config/<name>, optionally skipping subdirs
+#   flat   <name>
+#       copy contents of SOURCE_BASE/<name> directly into ~/.config/
+#   ignore <name>
+#       present in source but intentionally not managed here

 set -euo pipefail

@ -23,6 +31,7 @@ die()  { err "$*"; exit 1; }
 # ── parse updater.conf ────────────────────────────────────────────────────────
 SOURCE_BASE=""
 declare -A ENTRY_TYPE   # name → config | flat | ignore
+declare -A ENTRY_EXCL   # name → space-separated list of excluded subdirs

 while IFS= read -r line; do
    line="${line%%#*}"
@ -36,10 +45,19 @@ while IFS= read -r line; do
        continue
    fi

-    read -r type name _rest <<< "$line"
+    read -r type name rest <<< "$line"
    [[ -z "${name:-}" ]] && continue
+
    case "$type" in
-        config|flat|ignore) ENTRY_TYPE["$name"]="$type" ;;
+        config|flat|ignore)
+            ENTRY_TYPE["$name"]="$type"
+            # Parse optional "except sub1 sub2 ..."
+            if [[ "${rest:-}" =~ ^except[[:space:]]+(.+)$ ]]; then
+                ENTRY_EXCL["$name"]="${BASH_REMATCH[1]}"
+            else
+                ENTRY_EXCL["$name"]=""
+            fi
+            ;;
        *) warn "Unknown type '$type' for '$name' — skipping" ;;
    esac
 done < "$CONF_FILE"
@ -91,11 +109,35 @@ for name in "${!ENTRY_TYPE[@]}"; do
        continue
    fi

+    excl="${ENTRY_EXCL[$name]:-}"
+
    case "$type" in
        config)
-            rm -rf "${TARGET:?}/${name}"
-            cp -r "$src" "$TARGET/$name"
-            ok "config  $name"
+            if [[ -z "$excl" ]]; then
+                rm -rf "${TARGET:?}/${name}"
+                cp -r "$src" "$TARGET/$name"
+                ok "config  $name"
+            else
+                # Copy all top-level items of $src except excluded subdirs
+                mkdir -p "${TARGET}/${name}"
+                item_errors=0
+                while IFS= read -r -d '' item; do
+                    item_name="$(basename "$item")"
+                    skip_item=false
+                    for e in $excl; do
+                        [[ "$item_name" == "$e" ]] && skip_item=true && break
+                    done
+                    [[ "$skip_item" == true ]] && continue
+                    rm -rf "${TARGET:?}/${name}/${item_name}"
+                    cp -r "$item" "${TARGET}/${name}/" || (( item_errors++ )) || true
+                done < <(find "$src" -maxdepth 1 -mindepth 1 -print0 | sort -z)
+                if (( item_errors > 0 )); then
+                    err "config  $name (${item_errors} error(s))"
+                    (( errors++ )) || true
+                else
+                    ok "config  $name  (excl: $excl)"
+                fi
+            fi
            ;;
        flat)
            [[ -d "$src" ]] || {
--- a/desktopenvs/hyprlua/config-updater/updater.conf
+++ b/desktopenvs/hyprlua/config-updater/updater.conf
@ -7,14 +7,14 @@
 #               (for installation-specific files that live at the ~/.config root)
 # ignore <name> present in source but intentionally not managed here

-SOURCE_BASE = ~/Dotfiles/desktopenvs/hyprland
+SOURCE_BASE = ~/Dotfiles/desktopenvs/hyprlua

 # ── deployed as ~/.config/<name> ─────────────────────────────────────────────
 config alacritty
 config btop
 config dunst
 config gtk-3.0
-config hypr
+config hypr except usr
 config kitty
 config mimeapps.list
 config nwg-dock-hyprland
@ -27,9 +27,6 @@ config walker
 config wofi
 config xfce4

-# ── flat: directory contents copied directly into ~/.config/ ──────────────────
-flat hypr-usr          # installation-specific: binds, monitors, autostart, etc.
-
 # ── intentionally not managed here ───────────────────────────────────────────
 ignore config-updater  # the updater itself
 ignore CRT             # referenced from dotfiles path directly in binds.conf
@ -40,3 +37,7 @@ ignore greetd-tuigreet # deployed to /etc/greetd/ at install time
 ignore spicetify       # managed separately (spicetify handles its own config)
 ignore Vencord         # managed separately
 ignore waybar          # present but inactive; eww bar is used instead
+# hypr/usr/ contains device-specific lua files (monitors, binds, input, etc.).
+# They are excluded from automated syncs to preserve per-device customisations.
+# Deploy manually on a new device:
+#   cp -r ~/Dotfiles/desktopenvs/hyprlua/hypr/usr/ ~/.config/hypr/
--- a/desktopenvs/hyprlua/hypr/hyprland.lua
+++ b/desktopenvs/hyprlua/hypr/hyprland.lua
@ -1,12 +1,12 @@
 -- Hyprland Lua config — https://wiki.hypr.land/Configuring/Start/
-- User-side files are required from ~/.config/hypr/ alongside this file.
+-- Device-specific files live in ~/.config/hypr/usr/ (deployed from hypr/usr/).

-require("monitors")
-require("envvars")
-require("input")
-require("binds")
-require("windowrules")
-require("autostart")
+require("usr.monitors")
+require("usr.envvars")
+require("usr.input")
+require("usr.binds")
+require("usr.windowrules")
+require("usr.autostart")

 --------------------
 ---- MY PROGRAMS ---
--- a/desktopenvs/hyprlua/hypr/hyprpaper.conf
+++ b/desktopenvs/hyprlua/hypr/hyprpaper.conf
@ -8,4 +8,4 @@ wallpaper {
 }

 # per-monitor state, written by ~/.config/scripts/wallpaper-picker
-source = ~/.config/wallpaper.conf
+source = ~/.config/hypr/usr/wallpaper.conf
--- a/desktopenvs/hyprlua/hypr/usr/autostart.lua
+++ b/desktopenvs/hyprlua/hypr/usr/autostart.lua
--- a/desktopenvs/hyprlua/hypr/usr/binds.lua
+++ b/desktopenvs/hyprlua/hypr/usr/binds.lua
@ -61,7 +61,7 @@ hl.bind(mainMod .. " + W",               hl.dsp.exec_cmd("[tag +centered-L] kitt
 hl.bind(mainMod .. " + CTRL + R",        hl.dsp.exec_cmd("[tag +centered-L] kitty -e ~/.config/scripts/amssh"))
 hl.bind(mainMod .. " + F1",              hl.dsp.exec_cmd("[tag +centered] kitty ~/.config/scripts/helpmenu.sh"))
 hl.bind(mainMod .. " + CTRL + T",        hl.dsp.exec_cmd("[tag +centered-S] kitty bash ~/.config/scripts/timer-pick"))
-hl.bind(mainMod .. " + SHIFT + F1",      hl.dsp.exec_cmd("[tag +centered-L] kitty nvim ~/.config/binds.lua"))
+hl.bind(mainMod .. " + SHIFT + F1",      hl.dsp.exec_cmd("[tag +centered-L] kitty nvim ~/.config/hypr/usr/binds.lua"))

 hl.bind(mainMod .. " + CTRL + P",        hl.dsp.exec_cmd("~/.config/scripts/screenrec.sh"))

--- a/desktopenvs/hyprlua/hypr/usr/envvars.lua
+++ b/desktopenvs/hyprlua/hypr/usr/envvars.lua
--- a/desktopenvs/hyprlua/hypr/usr/input-device-exceptions.lua
+++ b/desktopenvs/hyprlua/hypr/usr/input-device-exceptions.lua
--- a/desktopenvs/hyprlua/hypr/usr/input.lua
+++ b/desktopenvs/hyprlua/hypr/usr/input.lua
@ -15,4 +15,4 @@ hl.config({
    },
 })

-require("input-device-exceptions")
+require("usr.input-device-exceptions")
--- a/desktopenvs/hyprlua/hypr/usr/mk-device-block.sh
+++ b/desktopenvs/hyprlua/hypr/usr/mk-device-block.sh
--- a/desktopenvs/hyprlua/hypr/usr/mk-device-exception.sh
+++ b/desktopenvs/hyprlua/hypr/usr/mk-device-exception.sh
--- a/desktopenvs/hyprlua/hypr/usr/monitors.lua
+++ b/desktopenvs/hyprlua/hypr/usr/monitors.lua
--- a/desktopenvs/hyprlua/hypr/usr/wallpaper.conf
+++ b/desktopenvs/hyprlua/hypr/usr/wallpaper.conf
--- a/desktopenvs/hyprlua/hypr/usr/windowrules.conf.old
+++ b/desktopenvs/hyprlua/hypr/usr/windowrules.conf.old
--- a/desktopenvs/hyprlua/hypr/usr/windowrules.lua
+++ b/desktopenvs/hyprlua/hypr/usr/windowrules.lua
--- a/desktopenvs/hyprlua/scripts/helpmenu.sh
+++ b/desktopenvs/hyprlua/scripts/helpmenu.sh
@ -1,3 +1,3 @@
 #!/bin/bash
-cat ~/Dotfiles/desktopenvs/hyprlua/hypr-usr/binds.lua | less
+cat ~/Dotfiles/desktopenvs/hyprlua/hypr/usr/binds.lua | less

--- a/desktopenvs/hyprlua/scripts/monitorhandler.sh
+++ b/desktopenvs/hyprlua/scripts/monitorhandler.sh
@ -1,4 +1,4 @@
 #!/bin/bash

-hyprpaper -c ~/.config/wallpaper.conf
-~/Dotfiles/desktopenvs/hyprland/scripts/ewwstart.sh
+hyprpaper -c ~/.config/hypr/usr/wallpaper.conf
+~/Dotfiles/desktopenvs/hyprlua/scripts/ewwstart.sh
--- a/desktopenvs/hyprlua/scripts/wallpaper-picker
+++ b/desktopenvs/hyprlua/scripts/wallpaper-picker
@ -6,7 +6,7 @@ set -u

 VERBOSE=0
 DIR=""
-STATE_FILE="${HOME}/.config/wallpaper.conf"
+STATE_FILE="${HOME}/.config/hypr/usr/wallpaper.conf"
 HYPRLOCK_BG_FILE="${HOME}/.config/hypr/hyprlock-backgrounds.conf"
 FIT_MODE="cover"

--- a/desktopenvs/migrate-hyprland-to-hyprlua.sh
+++ b/desktopenvs/migrate-hyprland-to-hyprlua.sh
@ -99,8 +99,8 @@ done

 # ── swap hypr-usr (the part that actually differs) ────────────────────────────
 # hyprland: *.conf files live at ~/.config/ root (sourced by hyprland.conf)
-# hyprlua:  *.lua files live at ~/.config/hypr/ (required by hyprland.lua)
-#           wallpaper.conf stays at ~/.config/ root (hyprpaper still reads it)
+# hyprlua:  device-specific files live at ~/.config/hypr/usr/
+#           (required via require("usr.*") in hyprland.lua)

 printf '\n'

@ -108,20 +108,17 @@ printf '\n'
 for f in "${HYPR_USR_CONFS[@]}"; do
    [[ -f "$TARGET/$f" ]] && run "rm '$TARGET/$f'" && note "removed ~/.config/$f"
 done
+# Remove wallpaper.conf from ~/.config/ root if present (old location)
+[[ -f "$TARGET/wallpaper.conf" ]] && run "rm '$TARGET/wallpaper.conf'" && note "removed ~/.config/wallpaper.conf"

-# Deploy new .lua files into ~/.config/hypr/
-if [[ -d "$SRC/hypr-usr" ]]; then
-    run "mkdir -p '$TARGET/hypr'"
-    for lua in "$SRC/hypr-usr"/*.lua; do
-        [[ -e "$lua" ]] || continue
-        run "cp '$lua' '$TARGET/hypr/'"
-        ok "hypr-usr  $(basename "$lua") → ~/.config/hypr/"
+# Deploy device-specific files into ~/.config/hypr/usr/
+if [[ -d "$SRC/hypr/usr" ]]; then
+    run "mkdir -p '$TARGET/hypr/usr'"
+    for f in "$SRC/hypr/usr"/*; do
+        [[ -e "$f" ]] || continue
+        run "cp '$f' '$TARGET/hypr/usr/'"
+        ok "hypr/usr  $(basename "$f") → ~/.config/hypr/usr/"
    done
-    # wallpaper.conf stays at ~/.config/ root
-    if [[ -f "$SRC/hypr-usr/wallpaper.conf" ]]; then
-        run "cp '$SRC/hypr-usr/wallpaper.conf' '$TARGET/'"
-        ok "hypr-usr  wallpaper.conf → ~/.config/"
-    fi
 fi

 # ── update config-updater ─────────────────────────────────────────────────────
--- a/setup/modules/Desktop-Environments/hyprlua.sh
+++ b/setup/modules/Desktop-Environments/hyprlua.sh
@ -103,11 +103,8 @@ for cfg in "${CONFIGS[@]}"; do
    rm -rf ~/.config/"$cfg"
    cp -r ~/Dotfiles/desktopenvs/hyprlua/"$cfg" ~/.config/
 done
-
-# User-side Lua files live inside ~/.config/hypr/ so require() finds them
-cp ~/Dotfiles/desktopenvs/hyprlua/hypr-usr/*.lua ~/.config/hypr/
-# wallpaper.conf stays at ~/.config/ for hyprpaper
-cp ~/Dotfiles/desktopenvs/hyprlua/hypr-usr/wallpaper.conf ~/.config/
+# hypr/usr/ (device-specific) is already inside hypr/ and copied above.
+# Customise ~/.config/hypr/usr/ per device after install.

 cp ~/Dotfiles/colors.conf ~/.config/colors.conf

--- a/sysupdate.sh
+++ b/sysupdate.sh
@ -14,6 +14,7 @@ set -uo pipefail
 readonly STATE_FILE="/updatestate"
 readonly SCRIPT_PREFIX="/updatescript"
 readonly NEWS_FEED="https://archlinux.org/feeds/news/"
+DOTFILES="${DOTFILES:-$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)}"

 AI_MODE=false
 for _arg in "$@"; do [[ "$_arg" == "--AI" ]] && AI_MODE=true; done
@ -485,6 +486,169 @@ PROMPT_EOF
    fi
 }

+# ═══════════════════════════════════════════════════════════════════════════════
+# CONFIG SYNC
+# ═══════════════════════════════════════════════════════════════════════════════
+
+# Items always skipped in the direct-copy fallback (managed by separate
+# installers, or intentionally not auto-synced).  hypr/usr/ (device-specific)
+# is handled separately inside the copy loop rather than via this list.
+declare -a _CFG_SKIP=(
+    config-updater  # meta: the updater script itself
+    CRT eww eww-nobattery eww-touch greetd-tuigreet spicetify Vencord waybar
+)
+
+# Resolve the dotfiles DE source directory for the current machine.
+# Priority: installed updater.conf SOURCE_BASE → running session detection.
+_de_source_dir() {
+    local conf="${XDG_CONFIG_HOME:-$HOME/.config}/config-updater/updater.conf"
+    if [[ -f "$conf" ]]; then
+        local src
+        src=$(awk -F'[[:space:]]*=[[:space:]]*' '/^SOURCE_BASE/{print $2; exit}' "$conf")
+        src="${src/#\~/$HOME}"
+        [[ -d "${src:-}" ]] && printf '%s' "$src" && return
+    fi
+    if pgrep -x Hyprland &>/dev/null || [[ -n "${HYPRLAND_INSTANCE_SIGNATURE:-}" ]]; then
+        printf '%s' "$DOTFILES/desktopenvs/hyprlua"
+    elif pgrep -x niri &>/dev/null || [[ -n "${NIRI_SOCKET:-}" ]]; then
+        printf '%s' "$DOTFILES/desktopenvs/niri"
+    fi
+}
+
+# Detect and offer to migrate the old hyprlua flat layout:
+#   old: ~/.config/hypr/monitors.lua etc.  (pre-usr/ era)
+#   new: ~/.config/hypr/usr/monitors.lua
+_migrate_hypr_usr() {
+    local target="${XDG_CONFIG_HOME:-$HOME/.config}"
+    local hypr_dir="$target/hypr"
+    local usr_dir="$hypr_dir/usr"
+
+    # Already in the right place — nothing to do
+    [[ -d "$usr_dir" ]] && return 0
+
+    # ── Case 1: old flat layout — lua files at ~/.config/hypr/ root ──────────
+    if [[ -d "$hypr_dir" ]]; then
+        local -a old_files=()
+        for f in monitors.lua envvars.lua input.lua binds.lua windowrules.lua \
+                  autostart.lua input-device-exceptions.lua; do
+            [[ -f "$hypr_dir/$f" ]] && old_files+=("$f")
+        done
+
+        if [[ ${#old_files[@]} -gt 0 ]]; then
+            echo
+            warn "Old hyprlua layout: device-specific files at ${BO}~/.config/hypr/${RS} root."
+            warn "New location: ${BO}~/.config/hypr/usr/${RS}"
+            echo
+            if ! ask "Migrate now?"; then
+                warn "Skipped — hyprland.lua will fail to start until migrated."
+                return 1
+            fi
+            mkdir -p "$usr_dir"
+            for f in "${old_files[@]}"; do
+                mv "$hypr_dir/$f" "$usr_dir/"
+                ok "moved  hypr/$f  →  hypr/usr/$f"
+            done
+            if [[ -f "$target/wallpaper.conf" && ! -f "$usr_dir/wallpaper.conf" ]]; then
+                mv "$target/wallpaper.conf" "$usr_dir/wallpaper.conf"
+                ok "moved  wallpaper.conf  →  hypr/usr/wallpaper.conf"
+            fi
+            echo
+            ok "Migration complete — device configs now at ${BO}~/.config/hypr/usr/${RS}"
+            return 0
+        fi
+    fi
+
+    # ── Case 2: no usr/ and no old files — copy template from dotfiles ───────
+    local de_dir; de_dir=$(_de_source_dir)
+    local src_usr="${de_dir:+$de_dir/hypr/usr}"
+    if [[ -n "${src_usr:-}" && -d "$src_usr" ]]; then
+        mkdir -p "$usr_dir"
+        cp -r "$src_usr/." "$usr_dir/"
+        ok "Copied  ${BO}hypr/usr/${RS} from dotfiles  ${DI}(no local config found)${RS}"
+    fi
+}
+
+sync_configs() {
+    section "Config Sync"
+
+    # ── Migration: old flat layout → hypr/usr/ ───────────────────────────────
+    _migrate_hypr_usr
+
+    # ── Preferred: use the installed update-configs.sh ───────────────────────
+    local cfg_script
+    for cfg_script in "$HOME/update-configs.sh" \
+                      "${XDG_CONFIG_HOME:-$HOME/.config}/config-updater/update-configs.sh"; do
+        [[ -x "$cfg_script" ]] && break || cfg_script=""
+    done
+
+    if [[ -n "${cfg_script:-}" ]]; then
+        log "Using installed config-updater  (${DI}${cfg_script}${RS})"
+        echo
+        if "$cfg_script"; then
+            echo
+            ok "Config sync complete"
+        else
+            echo
+            warn "Config sync completed with errors"
+        fi
+        return
+    fi
+
+    # ── Fallback: direct copy from dotfiles ──────────────────────────────────
+    local de_dir; de_dir=$(_de_source_dir)
+    if [[ -z "${de_dir:-}" || ! -d "$de_dir" ]]; then
+        warn "Cannot determine DE source directory — config sync skipped"
+        warn "Hint: deploy config-updater or ensure a supported DE session is running"
+        return
+    fi
+
+    local target="${XDG_CONFIG_HOME:-$HOME/.config}"
+    log "Source  →  ${BO}${de_dir}${RS}"
+    log "Target  →  ${BO}${target}${RS}"
+    warn "${BO}hypr/usr/${RS} preserved (device-specific — customise manually)"
+    echo
+
+    local synced=0 errs=0
+    while IFS= read -r -d '' item; do
+        local name; name="$(basename "$item")"
+        local skip=false
+        for s in "${_CFG_SKIP[@]}"; do [[ "$name" == "$s" ]] && skip=true && break; done
+        [[ "$skip" == true ]] && continue
+
+        if [[ "$name" == "hypr" ]]; then
+            # Copy hypr/ contents but preserve ~/.config/hypr/usr/
+            mkdir -p "$target/hypr"
+            local hypr_ok=true
+            while IFS= read -r -d '' hitem; do
+                local hname; hname="$(basename "$hitem")"
+                [[ "$hname" == "usr" ]] && continue
+                rm -rf "${target}/hypr/${hname}" && cp -r "$hitem" "$target/hypr/" \
+                    || hypr_ok=false
+            done < <(find "$item" -maxdepth 1 -mindepth 1 -print0 | sort -z)
+            if $hypr_ok; then
+                ok "synced  hypr  ${DI}(usr/ preserved)${RS}"
+                (( synced++ )) || true
+            else
+                err "failed  hypr"
+                (( errs++ )) || true
+            fi
+        elif rm -rf "${target:?}/${name}" && cp -r "$item" "$target/"; then
+            ok "synced  ${name}"
+            (( synced++ )) || true
+        else
+            err "failed  ${name}"
+            (( errs++ )) || true
+        fi
+    done < <(find "$de_dir" -maxdepth 1 -mindepth 1 -not -name '.*' -print0 | sort -z)
+
+    echo
+    if (( errs > 0 )); then
+        warn "Config sync: ${synced} synced, ${errs} error(s)"
+    else
+        ok "Config sync: ${BO}${synced}${RS} config(s) synced"
+    fi
+}
+
 # ═══════════════════════════════════════════════════════════════════════════════
 # MAIN
 # ═══════════════════════════════════════════════════════════════════════════════
@ -526,6 +690,10 @@ main() {
        echo
        ok "${BO}System is up to date.${RS}"
        write_state
+        echo
+        if ask "Sync dotfiles configs to ~/.config?"; then
+            sync_configs
+        fi
        rm -f "$_NEWS_PY"
        exit 0
    fi
@ -678,6 +846,11 @@ main() {
    fi
    echo

+    # ── Config sync ──────────────────────────────────────────────────────────
+    if ask "Sync dotfiles configs to ~/.config?"; then
+        sync_configs
+    fi
+
    rm -f "$_NEWS_PY"
 }