The dialog was landing off-cursor and at ~half-screen. Two Hyprland
gotchas were fighting each other: `move` is evaluated against the
window's natural size and `size` is applied afterwards from the top-left,
so a cursor_x-(window_w/2) move centred the pre-shrink window. zenity's
file chooser also ignores --width/--height and has a ~738x363 GTK
minimum.
Fix the size at 760x460 and hard-code the move offsets to half that
(380x230) so the shrunk window lands exactly on the pointer. Drop the
dead zenity --width/--height sizing from the script.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a size rule alongside the move so the zenity dialog no longer opens
at its default ~50% size. zenity clamps to its GTK minimum (~738x363),
which is well under half the screen.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Rename the at-cursor rule to filepicker and move the dialog to a fixed
position 10% into the display (from the top-left) instead of following
the cursor.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a dedicated at-cursor window rule (float + move to cursor) and point
the Super+F / Super+Shift+F filepicker binds at it, so the zenity dialog
opens centered on the mouse instead of mid-screen.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Prefix the Super+F / Super+Shift+F filepicker binds with [tag +centered]
so the zenity dialog spawns as a centered floating window (60% x 60%),
matching the centered rule in windowrules.lua. Same tagged-spawn
mechanism as Super+U.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add filepicker-clipboard.sh: a zenity file dialog that copies the
selected file's path (Super+F) or contents (Super+Shift+F) to the
clipboard via wl-copy. Path mode collapses $HOME to ~.
Repoints Super+F / Super+Shift+F from wofi-file-search/foldersearch
(kept as comments) in usr/binds.lua.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Diagnosed live in a VM: the bar rendered twice (two stacked rows). `hyprctl
layers` showed two `gtk-layer-shell` bar surfaces owned by two different eww
pids — an `eww daemon` and an `eww open bar`. The monitor count was correctly 1,
so the per-monitor loop was not at fault.
Root cause: ewwstart.sh started `eww daemon` and then immediately ran `eww open`
in a loop. The first `eww open` frequently ran before the freshly-started daemon
was ready, so it spawned its OWN second daemon and drew a second bar.
Fix (all three DE variants — hyprlua, hyprland, niri):
- Drop the separate `eww daemon`; rely on `eww open` to auto-start the daemon and
block until the window is mapped, so the first call establishes a single daemon
that the rest reuse (no race, no second daemon).
- killall eww + short settle before opening, so a reload starts clean.
- hyprlua/hyprland: count monitors via `hyprctl monitors -j | jq length` instead
of the fragile `hyprctl monitors | grep ID | wc -l`.
- export GTK_THEME (the bare assignment never took effect).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R5kHioUMK3mtf2eiLEozCM
Target ~/.config/hypr/usr/monitors.lua (the config Hyprland actually
loads) so `hyprctl reload` applies layouts immediately; the Dotfiles
repo copy stays the deploy source and is no longer written.
Add overlap geometry helpers and integrate them into the apply flow:
- block moves that would drive a monitor into a neighbor (TUI coords)
- snap positions to the MOVE_STEP_FINE grid to avoid frozen digits
- auto-resolve snap-induced collisions by re-reading the live layout
and nudging the moved monitor clear, up to MAX_RESOLVE_ITERS
- warn on residual overlap after apply and after save/reload
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the machine-specific DP-1/DP-3/HDMI-A-1 layout with a wildcard
catch-all rule (preferred mode, auto position, auto scale) that brings up
any connected output. Per-machine layout stays the job of monitor-manager,
which overwrites this file.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Installs ydotool via pacman and OpenDeck via Flatpak, wires ydotoold
and OpenDeck into the Hyprland autostart. Registers the module in the
TUI installer, answerfile generator, and docs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Steps taken:
- Added overlay/airootfs/etc/os-release with NAME="M-Archy", ID=m-archy,
ID_LIKE=arch so fastfetch and other tools show the correct distro name while
keeping pacman/AUR helpers happy via ID_LIKE.
- Added overlay/airootfs/etc/fastfetch/config.jsonc — system-wide fastfetch
config equivalent to:
--logo-type file --logo /etc/fastfetch/m-archy-SPC.txt
--logo-color-1 red --logo-color-2 red --color red
(keys + title colored red, custom file logo, no other defaults changed).
- Added overlay/airootfs/etc/fastfetch/m-archy-SPC.txt — copy of the pin.txt
ASCII logo; lands on the live ISO via the existing cp -r overlay/airootfs/
step in build.sh, no build.sh or profiledef.sh changes needed.
- Renamed resources/pin.txt → resources/m-archy-SPC.txt and updated all
references in .bashrc, .zshrc, and both kitty/bash-remoteconf files.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
logical_width/height now divide physical pixels by scale so the canvas
correctly represents the compositor's coordinate space (e.g. 3840px @1.5x
is 2560 logical px wide, not 3840).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The merge agent reverted the switch from usr.monitors to root-level monitors
(managed by hyprmoncfg). Restore main's version and update the surrounding
comment to explain the new arrangement.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces fixed 0.25 increments with mathematically valid scales p/q
(lowest terms, q≤6) where both width/s and height/s are integers.
For 1920x1200 this gives 25 steps including 2.4, matching what
Hyprland actually applies — no more mismatch between TUI display
and live value.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
hyprctl returns mirrorOf:"none" (string) for non-mirrored monitors.
Python treated it as truthy, causing apply_monitor to always emit a
mirror command, resetting resolution and scale on every keypress.
Also restores monitors.lua with correct mode/scale/transform fields.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Python curses TUI for managing Hyprland monitors interactively:
- Canvas shows monitors as boxes at their real relative positions
- Tab/Shift+Tab to cycle selection; hjkl/HJKL to move (50/10 px)
- u/i to rotate CCW/CW; n/N to cycle display modes live
- m to mirror (pick target with Tab, confirm with Enter)
- s saves to hypr/usr/monitors.lua atomically
- Scale cached and only recomputed on resize or viewport overflow
- Bound to Super+Shift+M as a centered-L floating kitty popup
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- caffeine: inhibit only `idle`, not `sleep`, so lid close still locks
- binds: lid-close unconditionally calls hyprlock; lid-open does dpms on
- hypridle: reduce lock timeout from 3 min to 2.5 min (150 s)
- eww (all 3 variants): add caffeine toggle button (☕/) with tooltip
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The Brio (and most UVC webcams) expose a second /dev/video* node that is
metadata-capture only. The chooser listed it, the existence-only guard
accepted it, and howdy aborted with a bare exit 1 because that node can
never deliver a frame.
- list_cameras: skip nodes with no capture pixel formats (is_capture_device)
- howdy_camera_ok: require an actual capture node, not just an existing path,
so a stale metadata-node device_path triggers reconfiguration
- howdy_add: tee howdy's output and surface the real reason on failure
instead of only the exit code
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Enrollment failed because howdy's own config.ini kept device_path=none,
so VideoCapture aborted before ever opening the lens (generic exit 1).
The presence-detect camera setting is separate and never reached howdy.
- add a "Howdy face auth — configure camera" menu entry that writes
device_path into /usr/lib/security/howdy/config.ini
- guard howdy_add: detect an unset/stale device_path and offer to fix it
before enrolling, instead of surfacing howdy's opaque exit 1
- shared camera chooser shows a live still from the selected node via
kitty's icat (gated on KITTY_WINDOW_ID), used for presence + howdy
- support non-IR colour webcams: detect IR vs colour from the preview's
saturation and tune recording_plugin (ffmpeg) + dark_threshold per type
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
howdy 2.x installs its CLI under root-only /usr/lib/security/howdy/ with
/usr/bin/howdy symlinked into it, so `command -v howdy` reports "not found"
for a normal user — the script wrongly thought howdy wasn't installed and
tried to reinstall it. Detect via the symlink and pacman -Qq instead; all
ops already run through `sudo howdy`.
This version also has no pam_howdy.so — it authenticates via pam_python.so
loading /usr/lib/security/howdy/pam.py. Switch the emitted PAM block to that
module and add pam_python_require() to install the AUR `pam-python`
dependency, replacing the dead pam_howdy.so existence check.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
enroll-biometrics.sh used non-existent howdy flags and a broken install
path. Fixes and additions:
- howdy add: label has no flag; feed it via stdin, use -U "$USER"
- howdy remove: id is positional, not -I
- list/test: pass -U "$USER" so all ops target the same account
- install: howdy is AUR-only, so the pacman fallback could never work;
require an AUR helper (yay/paru) and message clearly if absent
- new PAM 2FA menu: enroll FIDO key + wire howdy + pam_u2f into
sudo/hyprlock/login (both factors required, password fallback kept)
- hyprlock gets its own clean fallback (include system-auth) so the
block is not re-run via include login
- idempotent, timestamped backups, and a symmetric teardown option
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Start chamel as a daemon in autostart so keybinds (toggle/clear/
clear-and-deactivate) work on first use. Fix stale hyprland script
paths in frequentcommands.list and add all utility scripts.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add presence-detect.sh daemon: checks webcam every 2 min via OpenCV haar
cascade (presence_detect.py); holds systemd-inhibit --what=idle lock while a
face is detected so hypridle never fires during an active session
- Add enroll-biometrics.sh: Cyberqueer dialog TUI for camera configuration/test
and howdy face auth enrollment (add/list/remove/test models)
- Rewrite caffeine.sh (hyprlua + niri): replace kill/restart of idle daemon with
systemd-inhibit --what=idle:sleep + PID file; idle daemon stays running
- Fix hypridle.conf: correct ;; → ; in after_sleep_cmd, add
ignore_dbus_inhibit=false, bump lock timeout 120s→180s to account for the
2-min presence detection cycle
- Wire Super+Shift+B keybind for enrollment TUI in both hyprlua and niri
- Fix niri/scripts/python: was real dir with inner symlink causing cp -rL to
create a nested python/python/ hierarchy; replaced with direct symlink
- Add python-opencv and v4l-utils to hyprlua + niri installers
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reverts incorrect touch_long_press_time option (not a real Hyprland setting).
Adds evdev-right-click-emulation install + systemd enable to the tablet (T)
eww bar selection in the hyprlua installer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Switch to -i 25 icon size and -d autohide flag; drop old per-position
margin flags and -r resident flag; apply uniform command to all position
binds, toggle, and autostart reference.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Position binds used && which prevented the dock from starting when it
wasn't already running. Toggle bind had no kill logic so pressing it
again stacked a second instance instead of hiding the dock.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reduce icon size to 28 (-is 28) and increase all margins to 25px for a
cleaner, less intrusive dock appearance.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Restores the screenrotate centre widget (OSK, prev/next workspace,
rotate CW/CCW, close) that was lost to an external edit, and re-applies
all session changes on top:
- Circular (round) class on OSK, drawer, and all five screenrotate buttons
- Close button uses hyprctl dispatch killactive
- Workspace buttons use focusleft/focusright scripts
- winsworks hexpand + metric/scale hexpand for responsive volume slider
- Clock widget split into icon label + time label with a space between
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Switch font to 16pt with proportionally scaled padding/margins
- Full pill border-radius (999px) on all widgets
- Circular buttons (50%) for OSK, drawer, close, workspace, screen rotation
- Volume slider expands to fill available bar width (hexpand)
- Workspace buttons use focusleft.sh / focusright.sh scripts
- Add space between clock icon and time
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace invalid min-opacity with opacity in niri window rules; reorder
global rule before per-app overrides so last-match-wins works correctly
- dunst: frame_color #aaaaaa → #5018DD, icon_theme → Papirus-Dark
- eww: bar and slider colors aligned to CyberQueer #D6ABAB text color
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move hl.device blocks from input.lua into input-device-exceptions.lua
and add mk-device-exception.sh — a dialog-based TUI that pre-populates
fields from any existing block in the target file and replaces or
appends it on save.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Expand mk-device-block.sh to list mice alongside keyboards and emit the
pointer-appropriate config block. Add device blocks for the Logitech
Pro 2 and G903 mice in input.lua.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
hl.dsp.*() inside a function callback only constructs a Dispatcher
object — hl.dispatch() is required to actually execute it.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
wallpaper-picker now calls write_hyprlock_state() on apply, writing
per-monitor background blocks to ~/.config/hypr/hyprlock-backgrounds.conf.
hyprlock.conf sources that file instead of a hardcoded background block,
with a committed default for first-boot.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
hl.dsp.window.close() is not a valid Hyprland Lua API method;
replace with hyprctl dispatch killactive.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Tablet devices require output= in hl.device() for transform to take
effect, unlike touchscreens which auto-bind to their display.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace hyprctl dispatch with hyprctl eval using hl.dsp.* in all
three eww variants. Workspace switching uses hl.dsp.focus with r+/r-
relative prefixes; killactive becomes hl.dsp.window.close(); exec
uses hl.dsp.exec_cmd.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace hyprctl dispatch exec with direct daemon invocation in caffeine.sh,
and replace defunct \$LAPTOP_KB_ENABLED .conf variable with the actual
device key path in hyprland-toggle-touchpad.sh.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Qt: replace QT_STYLE_OVERRIDE/QT_STYLE_SHEET env vars with QT_QPA_PLATFORMTHEME=qt6ct +
QT_QUICK_CONTROLS_STYLE=Fusion; add cyberqueer Qt6 style plugin (QProxyStyle wrapping
Fusion with hardcoded dark palette); enable custom_palette in qt6ct.conf so qt6ct applies
the dark QPalette directly for both Qt Widgets and Qt Quick apps.
GTK: fix dark mode not applying — set gtk-application-prefer-dark-theme=1 in GTK3
settings.ini; add gsettings color-scheme=prefer-dark to install script (required by
libadwaita apps which ignore gtk-theme-name); add index.theme so the theme is recognized
by GTK theme discovery.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move settings.json out of the wrong vicinae/vicinae/ subdir so it deploys
to ~/.config/vicinae/settings.json where vicinae actually reads it, enabling
the cyberqueer theme. Add GTK_THEME=cyberqueer on launch for correct font
rendering. Add float=true to the launcher window rule so the cursor-position
move formula is applied.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Duplicates desktopenvs/hyprland/ as desktopenvs/hyprlua/ and converts all
Hyprland-specific configs (.conf) to Lua (.lua) using the 0.55+ hl.* API:
hyprland.lua, envvars.lua, monitors.lua, input.lua, autostart.lua,
windowrules.lua, binds.lua. Non-Hyprland tool configs (hyprpaper, hyprlock,
hypridle, hyprtoolkit) remain as .conf. Adds hyprlua.sh installer (user-side
.lua files install to ~/.config/hypr/ for require() resolution) and registers
HyprLua as the recommended DE option in tui-install.sh, marking the old
hyprlang-based Hyprland install as legacy.
Also consolidates hyprland (legacy) env vars into hypr-usr/envvars.conf,
removing duplicates from hyprland.conf and monitors.conf.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
