Rename the security-scan policy to dev_mon_clamscan (fits the XXX_mon_* naming
for monitoring groups) and make it hand results to CheckMK natively instead of
uploading logs to an SMB share.
- dev_mon_clamscan.sh: runs the daily ClamAV/rkhunter/chkrootkit scan and writes
its own CheckMK local check (ansipa_clamscan → service "Ansipa_ClamScan"); the
agent from dev_mon_base collects it. Removes the SMB upload entirely. Discovery
matches dev_mon_clamscan BEFORE the generic dev_mon_* catch-all so it sets
WANT_CLAMSCAN rather than being treated as a dev_mon.sh check. mkdir -p the
cron dir (minimal hosts lack /etc/cron.d until cron is installed).
- Remove the now-redundant dev_mon_malware check from dev_mon.sh (subsumed).
- Remove usr_scan-notify and the whole SMB scan-alert pipeline it fed:
ansipa-fetch-alerts.sh, ansipa-scan-notify.sh, server ansipa-check-scans.sh,
the ansipa-scans Samba share + scanupload account, /etc/ansipa-smb.creds, and
the SMB_SCAN_PASSWORD/smb_scan_password variables (playbook, compose, run.sh,
.env, Dockerfile). The ansipa-luks-keys and ansipa-policystore shares stay.
Verified live on the Arch client: enrolling in dev_mon_clamscan writes the scan
script, cron, and local check (which reports "Ansipa_ClamScan"); leaving the
group removes all three. Docs updated (policy tables, architecture, SMB shares,
scan-flow → CheckMK).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01MUhrcFU8J1Hnf7vNqNxZNi
Adds full CheckMK CE 2.3 monitoring integration to the ansipa policy
enforcement system. Monitoring is group-driven — adding a host to an
IPA hostgroup installs the relevant agent checks automatically.
New monitoring groups:
dev_mon_base — install check-mk-agent, register host in CMK;
packages check + built-in CPU/RAM/disk/uptime
dev_mon_malware — ClamAV scan results from dev_security-scan log
dev_mon_timeshift — Timeshift snapshot age (WARN >5d, CRIT >10d)
dev_mon_power — CPU package TDP via Intel RAPL or lm-sensors
usr_mon_logins — SSH login attempts (success/failed/invalid-user)
Key implementation details:
- ansipa-checkmk-setup.sh: one-time folder/group creation on FreeIPA
container; reads automation secret from shared cmk-creds volume;
stores credentials in IPA dev_mon_base description for clients
- ansipa-checkmk.service: starts after IPA first-boot, retries until
both IPA and CheckMK are ready
- docker-compose.yml: CheckMK container adds port 8000 (agent receiver
for push mode); command override writes automation.secret to shared
volume, patches cookie_auth.conf for API access, and polls
/cmk-creds/push-mode-*.req to configure push-agent hosts in hosts.mk
- ansipa-enforce-policies.sh: local check scripts for all 5 groups;
cmk-agent-ctl registration + auto push timer when push mode is active
- CheckMK REST API path corrected to /cmk/check_mk/api/1.0/ (not
/cmk/api/1.0/ which returns 404 in 2.3)
- .gitignore added to prevent accidental commit of .env test creds
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DHops6PU4c2Mv5UyhUj8Ms
Fixes found during a complete archiso → FreeIPA DC → client enrollment →
ansipa policy deployment test cycle (Rocky 9 client VM, FreeIPA in Docker):
arch-autoinstall.sh:
- Add openssh to pacstrap — was missing, breaking headless/automated installs
- Enable sshd at boot and set PermitRootLogin yes for post-install access
ansipa-install-packages.sh:
- Fix broken uninstall logic: three always-true conditions caused every package
removal to be silently skipped; replace with a state-file-based approach that
tracks packages installed by ansipa and removes only those when the IPA group
disappears
ansipa-enforce-policies.sh:
- Add usr_admin policy: creates /etc/sudoers.d/ansipa-usr-admin granting full
sudo to the FreeIPA usr_admin user group on every enrolled host; reverted
when the IPA group is deleted
- Add usr_prt_<printer> policy: auto-adds CUPS printers for FreeIPA user group
members at login; printer URI stored in IPA group description; per-user ACL;
reverted when group is deleted or membership ends
deploy-ansipa-policies.yml:
- Document usr_admin and usr_prt_* policies in header comment
- Install cups package on clients (required for printer policy)
FreeIPA container (image/):
- Add docker-env.service: extracts IPA_*/SMB_*/LUKS_*/KEYCLOAK_* env vars from
/proc/1/environ into /etc/container.env on container start; services read from
there rather than relying on PassEnvironment (which is lost on container restart)
- Add run.sh: wrapper that starts FreeIPA with --cgroupns host, required on cgroup
v2 hosts (WSL2, recent Linux) because Docker Compose schema does not expose
cgroupns_mode; also wires LUKS_KEY_UPLOAD_PASSWORD which the SMB service needs
- Dockerfile: copy + enable docker-env.service; add glibc-langpack-en for locale
- ansipa-smb.service: use EnvironmentFile=/etc/container.env (via docker-env.service)
instead of PassEnvironment; add docker-env.service dependency
- ipa-first-boot.service: add docker-env.service dependency + EnvironmentFile
- ipa-first-boot.sh: add --skip-mem-check (container has limited cgroup memory
visibility); remove --no-reverse from non-DNS path (was invalid without DNS)
- docker-compose.yml: add prominent cgroupns note explaining when to use run.sh
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01DHops6PU4c2Mv5UyhUj8Ms
ansipa-smb.service: WantedBy=multi-user.target (was smb.service) so the
setup service always runs at boot, not only when smb.service pulls it in
docker-compose.yml: add NetBIOS UDP ports 137/138 to match Dockerfile EXPOSE
and nmb.service being enabled
ansipa-smb-setup.sh:
- use printf '%q' when writing SMB_SCAN_PASSWORD to ansipa-smb.env so
passwords with spaces or shell-special chars are correctly quoted
- always write /etc/cron.d/ansipa-check-scans (remove the [[ ! -f ]] guard)
since /etc/cron.d is on the ephemeral container layer and is lost on
container recreation; the service runs on every start anyway
Dockerfile: add -e SMB_SCAN_PASSWORD and -p 445:445 to the quick-test comment
ansipa-fetch-alerts.sh: replace $NEW && log with [[ "$NEW" == true ]] && log
to avoid set -e ambiguity with the 'false' builtin
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Container (ansipa image):
- Add samba + cronie to Dockerfile; expose ports 445/139
- ansipa-smb-setup.sh: idempotent setup of smbd + scanupload user +
/data/scan-results/{archive,alerts}/ on every container start
- ansipa-smb.service: runs setup before smb.service on each boot
- ansipa-check-scans.sh: hourly cron on server; analyses archive logs for
ClamAV/rkhunter/chkrootkit findings and writes <host>/<date>.alert files
- docker-compose.yml: add SMB_SCAN_PASSWORD env var + port mappings
- .env.example: document SMB_SCAN_PASSWORD
Client (policy-security-scan):
- Scan script now uploads log to //ipa-server/ansipa-scans/archive/<host>/
via smbclient after each run
Client (policy-scan-notify — new policy group):
- ansipa-fetch-alerts.sh: root timer (10 min) downloads alerts from SMB into
~/administration/<hostname>/ for each active login session; deletes server
alert when user removes local file (acknowledgment)
- ansipa-scan-notify.sh: user daemon started via /etc/profile.d/ansipa-notify.sh;
sends notify-send every 10 min while *.alert files remain in ~/administration/
- deploy-ansipa-policies.yml: installs samba-client, deploys SMB creds file
(/etc/ansipa-smb.creds, 0600), and deploys both notification scripts
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
freeipa-image-builder.sh: TUI chooser that builds a FreeIPA server image
and exports it to four target formats:
docker — builds via podman/docker, optional registry push
lxc — exports container rootfs as .tar.zst Proxmox CT template,
generates pct import instructions
proxmox-vm — downloads Rocky/Fedora cloud image, customizes with
virt-customize, outputs QCOW2 + cloud-init user-data.yml
oci-archive — skopeo OCI tarball for air-gapped import
Keycloak TUI option generates the full constellation:
docker-compose.yml FreeIPA + Keycloak + PostgreSQL stack
.env pre-filled env template (passwords placeholder)
keycloak-configure.sh post-start Keycloak REST API config script
image/Dockerfile: Fedora 41 + freeipa-server-dns + ansible-core,
systemd-enabled container (CMD /sbin/init).
image/ipa-first-boot.{sh,service}: systemd oneshot that runs
ipa-server-install on first container/VM boot from env vars
(IPA_DOMAIN, IPA_ADMIN_PASSWORD, IPA_DM_PASSWORD, and optionals).
ConditionPathExists=!/etc/ipa/default.conf makes it idempotent.
image/keycloak-configure.sh: Keycloak REST API automation that:
- waits for Keycloak readiness
- creates a realm
- wires FreeIPA LDAP user federation (READ_ONLY, vendor=rhds)
- adds attribute mappers: email, firstName, lastName, uidNumber
- adds group mapper (IPA groups → Keycloak groups, cn=groups,cn=accounts)
- triggers an initial full user sync
image/docker-compose.yml: freeipa + postgres + keycloak services on
a private 172.30.0.0/24 bridge; FreeIPA has a fixed IP so Keycloak
can resolve it via extra_hosts.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Amir Alexander Abdelbaki