Same Vicinae theming bug as hyprlua, now fixed across the remaining DE modules:
- Vicinae loads named custom themes only from ~/.local/share/vicinae/themes/*.toml,
not ~/.config/vicinae/. Both modules now deploy cyberqueer.toml there so
settings.json's theme.dark.name="cyberqueer" resolves instead of falling back
to the stock dark theme.
- hyprland: the source had settings.json double-nested at vicinae/vicinae/, so it
deployed to ~/.config/vicinae/vicinae/settings.json and was never read. Flattened
the source to vicinae/{settings.json,cyberqueer.toml} (matching hyprlua), so it
now lands at ~/.config/vicinae/settings.json.
- niri/vicinae is a symlink to hyprlua/vicinae and niri.sh uses `cp -rL`, so its
settings.json was already correct; only the theme-deploy line was needed.
Verified by simulating both deploys into a temp HOME: final layout matches the
known-good hyprlua result.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01R5kHioUMK3mtf2eiLEozCM
Target ~/.config/hypr/usr/monitors.lua (the config Hyprland actually
loads) so `hyprctl reload` applies layouts immediately; the Dotfiles
repo copy stays the deploy source and is no longer written.
Add overlap geometry helpers and integrate them into the apply flow:
- block moves that would drive a monitor into a neighbor (TUI coords)
- snap positions to the MOVE_STEP_FINE grid to avoid frozen digits
- auto-resolve snap-induced collisions by re-reading the live layout
and nudging the moved monitor clear, up to MAX_RESOLVE_ITERS
- warn on residual overlap after apply and after save/reload
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the machine-specific DP-1/DP-3/HDMI-A-1 layout with a wildcard
catch-all rule (preferred mode, auto position, auto scale) that brings up
any connected output. Per-machine layout stays the job of monitor-manager,
which overwrites this file.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Installs ydotool via pacman and OpenDeck via Flatpak, wires ydotoold
and OpenDeck into the Hyprland autostart. Registers the module in the
TUI installer, answerfile generator, and docs.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Steps taken:
- Added overlay/airootfs/etc/os-release with NAME="M-Archy", ID=m-archy,
ID_LIKE=arch so fastfetch and other tools show the correct distro name while
keeping pacman/AUR helpers happy via ID_LIKE.
- Added overlay/airootfs/etc/fastfetch/config.jsonc — system-wide fastfetch
config equivalent to:
--logo-type file --logo /etc/fastfetch/m-archy-SPC.txt
--logo-color-1 red --logo-color-2 red --color red
(keys + title colored red, custom file logo, no other defaults changed).
- Added overlay/airootfs/etc/fastfetch/m-archy-SPC.txt — copy of the pin.txt
ASCII logo; lands on the live ISO via the existing cp -r overlay/airootfs/
step in build.sh, no build.sh or profiledef.sh changes needed.
- Renamed resources/pin.txt → resources/m-archy-SPC.txt and updated all
references in .bashrc, .zshrc, and both kitty/bash-remoteconf files.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
logical_width/height now divide physical pixels by scale so the canvas
correctly represents the compositor's coordinate space (e.g. 3840px @1.5x
is 2560 logical px wide, not 3840).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The merge agent reverted the switch from usr.monitors to root-level monitors
(managed by hyprmoncfg). Restore main's version and update the surrounding
comment to explain the new arrangement.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces fixed 0.25 increments with mathematically valid scales p/q
(lowest terms, q≤6) where both width/s and height/s are integers.
For 1920x1200 this gives 25 steps including 2.4, matching what
Hyprland actually applies — no more mismatch between TUI display
and live value.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
hyprctl returns mirrorOf:"none" (string) for non-mirrored monitors.
Python treated it as truthy, causing apply_monitor to always emit a
mirror command, resetting resolution and scale on every keypress.
Also restores monitors.lua with correct mode/scale/transform fields.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Python curses TUI for managing Hyprland monitors interactively:
- Canvas shows monitors as boxes at their real relative positions
- Tab/Shift+Tab to cycle selection; hjkl/HJKL to move (50/10 px)
- u/i to rotate CCW/CW; n/N to cycle display modes live
- m to mirror (pick target with Tab, confirm with Enter)
- s saves to hypr/usr/monitors.lua atomically
- Scale cached and only recomputed on resize or viewport overflow
- Bound to Super+Shift+M as a centered-L floating kitty popup
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- caffeine: inhibit only `idle`, not `sleep`, so lid close still locks
- binds: lid-close unconditionally calls hyprlock; lid-open does dpms on
- hypridle: reduce lock timeout from 3 min to 2.5 min (150 s)
- eww (all 3 variants): add caffeine toggle button (☕/) with tooltip
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The Brio (and most UVC webcams) expose a second /dev/video* node that is
metadata-capture only. The chooser listed it, the existence-only guard
accepted it, and howdy aborted with a bare exit 1 because that node can
never deliver a frame.
- list_cameras: skip nodes with no capture pixel formats (is_capture_device)
- howdy_camera_ok: require an actual capture node, not just an existing path,
so a stale metadata-node device_path triggers reconfiguration
- howdy_add: tee howdy's output and surface the real reason on failure
instead of only the exit code
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Enrollment failed because howdy's own config.ini kept device_path=none,
so VideoCapture aborted before ever opening the lens (generic exit 1).
The presence-detect camera setting is separate and never reached howdy.
- add a "Howdy face auth — configure camera" menu entry that writes
device_path into /usr/lib/security/howdy/config.ini
- guard howdy_add: detect an unset/stale device_path and offer to fix it
before enrolling, instead of surfacing howdy's opaque exit 1
- shared camera chooser shows a live still from the selected node via
kitty's icat (gated on KITTY_WINDOW_ID), used for presence + howdy
- support non-IR colour webcams: detect IR vs colour from the preview's
saturation and tune recording_plugin (ffmpeg) + dark_threshold per type
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
howdy 2.x installs its CLI under root-only /usr/lib/security/howdy/ with
/usr/bin/howdy symlinked into it, so `command -v howdy` reports "not found"
for a normal user — the script wrongly thought howdy wasn't installed and
tried to reinstall it. Detect via the symlink and pacman -Qq instead; all
ops already run through `sudo howdy`.
This version also has no pam_howdy.so — it authenticates via pam_python.so
loading /usr/lib/security/howdy/pam.py. Switch the emitted PAM block to that
module and add pam_python_require() to install the AUR `pam-python`
dependency, replacing the dead pam_howdy.so existence check.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
enroll-biometrics.sh used non-existent howdy flags and a broken install
path. Fixes and additions:
- howdy add: label has no flag; feed it via stdin, use -U "$USER"
- howdy remove: id is positional, not -I
- list/test: pass -U "$USER" so all ops target the same account
- install: howdy is AUR-only, so the pacman fallback could never work;
require an AUR helper (yay/paru) and message clearly if absent
- new PAM 2FA menu: enroll FIDO key + wire howdy + pam_u2f into
sudo/hyprlock/login (both factors required, password fallback kept)
- hyprlock gets its own clean fallback (include system-auth) so the
block is not re-run via include login
- idempotent, timestamped backups, and a symmetric teardown option
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Start chamel as a daemon in autostart so keybinds (toggle/clear/
clear-and-deactivate) work on first use. Fix stale hyprland script
paths in frequentcommands.list and add all utility scripts.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add presence-detect.sh daemon: checks webcam every 2 min via OpenCV haar
cascade (presence_detect.py); holds systemd-inhibit --what=idle lock while a
face is detected so hypridle never fires during an active session
- Add enroll-biometrics.sh: Cyberqueer dialog TUI for camera configuration/test
and howdy face auth enrollment (add/list/remove/test models)
- Rewrite caffeine.sh (hyprlua + niri): replace kill/restart of idle daemon with
systemd-inhibit --what=idle:sleep + PID file; idle daemon stays running
- Fix hypridle.conf: correct ;; → ; in after_sleep_cmd, add
ignore_dbus_inhibit=false, bump lock timeout 120s→180s to account for the
2-min presence detection cycle
- Wire Super+Shift+B keybind for enrollment TUI in both hyprlua and niri
- Fix niri/scripts/python: was real dir with inner symlink causing cp -rL to
create a nested python/python/ hierarchy; replaced with direct symlink
- Add python-opencv and v4l-utils to hyprlua + niri installers
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reverts incorrect touch_long_press_time option (not a real Hyprland setting).
Adds evdev-right-click-emulation install + systemd enable to the tablet (T)
eww bar selection in the hyprlua installer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Switch to -i 25 icon size and -d autohide flag; drop old per-position
margin flags and -r resident flag; apply uniform command to all position
binds, toggle, and autostart reference.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Position binds used && which prevented the dock from starting when it
wasn't already running. Toggle bind had no kill logic so pressing it
again stacked a second instance instead of hiding the dock.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Reduce icon size to 28 (-is 28) and increase all margins to 25px for a
cleaner, less intrusive dock appearance.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Restores the screenrotate centre widget (OSK, prev/next workspace,
rotate CW/CCW, close) that was lost to an external edit, and re-applies
all session changes on top:
- Circular (round) class on OSK, drawer, and all five screenrotate buttons
- Close button uses hyprctl dispatch killactive
- Workspace buttons use focusleft/focusright scripts
- winsworks hexpand + metric/scale hexpand for responsive volume slider
- Clock widget split into icon label + time label with a space between
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Switch font to 16pt with proportionally scaled padding/margins
- Full pill border-radius (999px) on all widgets
- Circular buttons (50%) for OSK, drawer, close, workspace, screen rotation
- Volume slider expands to fill available bar width (hexpand)
- Workspace buttons use focusleft.sh / focusright.sh scripts
- Add space between clock icon and time
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace invalid min-opacity with opacity in niri window rules; reorder
global rule before per-app overrides so last-match-wins works correctly
- dunst: frame_color #aaaaaa → #5018DD, icon_theme → Papirus-Dark
- eww: bar and slider colors aligned to CyberQueer #D6ABAB text color
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move hl.device blocks from input.lua into input-device-exceptions.lua
and add mk-device-exception.sh — a dialog-based TUI that pre-populates
fields from any existing block in the target file and replaces or
appends it on save.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Expand mk-device-block.sh to list mice alongside keyboards and emit the
pointer-appropriate config block. Add device blocks for the Logitech
Pro 2 and G903 mice in input.lua.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
hl.dsp.*() inside a function callback only constructs a Dispatcher
object — hl.dispatch() is required to actually execute it.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
wallpaper-picker now calls write_hyprlock_state() on apply, writing
per-monitor background blocks to ~/.config/hypr/hyprlock-backgrounds.conf.
hyprlock.conf sources that file instead of a hardcoded background block,
with a committed default for first-boot.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
hl.dsp.window.close() is not a valid Hyprland Lua API method;
replace with hyprctl dispatch killactive.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Tablet devices require output= in hl.device() for transform to take
effect, unlike touchscreens which auto-bind to their display.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace hyprctl dispatch with hyprctl eval using hl.dsp.* in all
three eww variants. Workspace switching uses hl.dsp.focus with r+/r-
relative prefixes; killactive becomes hl.dsp.window.close(); exec
uses hl.dsp.exec_cmd.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace hyprctl dispatch exec with direct daemon invocation in caffeine.sh,
and replace defunct \$LAPTOP_KB_ENABLED .conf variable with the actual
device key path in hyprland-toggle-touchpad.sh.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Qt: replace QT_STYLE_OVERRIDE/QT_STYLE_SHEET env vars with QT_QPA_PLATFORMTHEME=qt6ct +
QT_QUICK_CONTROLS_STYLE=Fusion; add cyberqueer Qt6 style plugin (QProxyStyle wrapping
Fusion with hardcoded dark palette); enable custom_palette in qt6ct.conf so qt6ct applies
the dark QPalette directly for both Qt Widgets and Qt Quick apps.
GTK: fix dark mode not applying — set gtk-application-prefer-dark-theme=1 in GTK3
settings.ini; add gsettings color-scheme=prefer-dark to install script (required by
libadwaita apps which ignore gtk-theme-name); add index.theme so the theme is recognized
by GTK theme discovery.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Move settings.json out of the wrong vicinae/vicinae/ subdir so it deploys
to ~/.config/vicinae/settings.json where vicinae actually reads it, enabling
the cyberqueer theme. Add GTK_THEME=cyberqueer on launch for correct font
rendering. Add float=true to the launcher window rule so the cursor-position
move formula is applied.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Duplicates desktopenvs/hyprland/ as desktopenvs/hyprlua/ and converts all
Hyprland-specific configs (.conf) to Lua (.lua) using the 0.55+ hl.* API:
hyprland.lua, envvars.lua, monitors.lua, input.lua, autostart.lua,
windowrules.lua, binds.lua. Non-Hyprland tool configs (hyprpaper, hyprlock,
hypridle, hyprtoolkit) remain as .conf. Adds hyprlua.sh installer (user-side
.lua files install to ~/.config/hypr/ for require() resolution) and registers
HyprLua as the recommended DE option in tui-install.sh, marking the old
hyprlang-based Hyprland install as legacy.
Also consolidates hyprland (legacy) env vars into hypr-usr/envvars.conf,
removing duplicates from hyprland.conf and monitors.conf.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace all /home/themiro/ path references with $HOME equivalents
across .zshrc, monitorhandler.sh (now derives path from script
location), gtk bookmarks, spicetify config, ulauncher generated CSS,
and nvim init.lua.old.
Delete commented-out AWS signed URL with embedded credentials from
setup/deprecated/hyprland.sh.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Fix touchscreen detection (section renamed from Touchscreen to Touch Device)
and device keyword syntax (device:NAME -> device[NAME]:transform). Also swap
cw/ccw in acw/wcw wrapper scripts which were inverted.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- amssh: use dedicated /etc/pam.d/amssh service instead of login (pam_u2f
was commented out in login); auto-create service and register key on
first-launch FIDO selection
- amssh: redirect pamtester stdout+stderr to /dev/tty so the tap prompt is
visible and the success message doesn't contaminate pass=$(_get_passphrase)
- amssh: split _fido_pam_available into _fido_hardware_available (for dialog
gating) and _fido_pam_available (runtime — requires keys file + PAM service)
- setup: add pamtester to core-packages.sh
- setup: add audit-packages.sh to verify installed packages come from the
expected source (pacman/AUR/flatpak)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- AES-256-CBC store with PBKDF2-SHA256 (600k iters), passphrase auth
- FIDO2/PAM opt-in second factor via pam_u2f + pamtester
- fzf TUI: vim-style nav (j/k/g/G//), a=add, d=delete, q=quit
- Full-screen tput add form with Tab/Enter field advance, star-masked password
- SSH_ASKPASS_REQUIRE=force for stored password auth (no sshpass)
- First-launch dialog to choose passphrase vs FIDO2
- Hyprland keybind: SUPER-ALT-CTRL-S
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replaces the hardcoded inline-generated ~/update-hypr-configs.sh with
a proper dotfiles-resident script + config file:
config-updater/update-configs.sh — reads updater.conf, applies
configs, warns about untracked source items and manifest drift
config-updater/updater.conf — declares config/flat/ignore
entries and SOURCE_BASE; hypr-usr is flat (contents → ~/.config/)
hyprland-new.sh step 15 now symlinks both into place instead of
generating a hardcoded script inline. The output is renamed from
~/update-hypr-configs.sh to ~/update-configs.sh.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace the Python sine-wave generator and raw PCM piping with
paplay playing alarm-clock-elapsed.oga, falling back to
canberra-gtk-play. Also export PULSE_RUNTIME_PATH for the detached
setsid process so paplay can find the PipeWire-Pulse socket.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- default selection = monitor under the mouse (cursorpos + geometry math)
- 1-9 toggle individual monitors, a toggles all
- Space/Enter both apply
- persist per-monitor state to ~/.config/wallpaper.conf using new wallpaper{} syntax
- hyprpaper.conf sources ~/.config/wallpaper.conf so picks survive reboot
