Adds w3m to the install list and appends the text/html mailcap entry
so alot renders HTML emails as plain text via w3m -dump.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
The glob path = .../calendars/* was not expanded by khal, so no events
were visible. Now caldav-sync.sh and ics-to-calendarim both generate
explicit [[name]]/path entries per calendar and regenerate the config
on every sync so newly discovered calendars are picked up automatically.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Installs vdirsyncer + khal, writes vdirsyncer/khal configs, creates
ics-to-calendarim converter to populate calendar.vim local JSON cache,
and sets up a systemd user timer for 15-minute periodic sync.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- x now opens a full-screen overlay: alot left (55%), abook top-right,
calendar bottom-right
- Add esc = exit bindings to alot config for search/thread/taglist/
bufferlist modes, applied to live ~/.config/alot/config and to the
mail-notmuch.sh setup script
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Replace tab/vsplit PIM approach with nvim_open_win floating windows:
r opens a tiled full-screen overlay (alot top, calendar+abook bottom)
n/g/f open individual centered floats with rounded border
- Add setup/modules/optional-Modules/apps/mail-notmuch.sh:
configures mbsync, msmtp, notmuch, alot from interactive prompts
installs a systemd user timer for 5-min periodic mail sync
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
When running as root (archiso chroot context), all three TUI installers
previously died immediately. Replace the hard die with a sudo passthrough
shim ($TMP_D/bin/sudo → exec "$@") prepended to PATH, so every module's
`sudo pacman`, `sudo systemctl` etc. just executes directly as root.
The shim lives in TMP_D and is cleaned up by the existing EXIT trap.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Pin pamu2fcfg enrollment to the target hostname (-o/-i pam://$HOSTNAME)
so the credential origin matches pam_u2f.so at runtime; enrolling outside
the chroot previously used the live ISO hostname, causing auth to fail
- Add `cue` to the pam_u2f.so PAM line so ly prompts the user to touch
the key after password entry
- Add --needed to hyprlua AUR yay call to survive re-runs
- Degrade gracefully in lamco-rdp-server when no user D-Bus session is
active (systemctl --user enable would abort the module under set -e)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Add modules/lib/logging.sh with log(), skip(), warn(), err() helpers.
Source it in all 84 scripts (core, DEs, optional apps) and replace bare
echo calls with structured log messages. Add log file capture to install.sh.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
sauerbraten: open-source Cube 2 FPS (pacman)
stuntrally: rally racing game via Flatpak (io.github.stuntrally.StuntRally3)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
openarena: open-source Quake III Arena (pacman)
tetris: bastet + vitetris (pacman + AUR)
doom: Chocolate Doom + Freedoom game data (pacman)
Wired up in simple-install.sh, tui-install.sh, and install-modules.sh.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
nmtui is not available on the archiso live environment; direct users to
iwctl (WiFi) or ethernet instead, and pause for input before re-checking.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Arrow keys navigate a viewport-bounded list, Space toggles items,
Enter/n confirms — fixes overflow on the app selection screen.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Rewrites simple-install.sh to use ANSI/read-based TUI primitives
(tui_msg, tui_yesno, tui_input, tui_checklist, tui_menu) instead of
dialog, removing the dialog dependency entirely.
Updates archbaseos-guided-install.sh to invoke simple-install.sh and
drops dialog from the archiso package list; error_handler now uses the
plain read-based croc prompt unconditionally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
tui-install.sh: dialog height=40 apps checklist and height=24 confirm
dialog both exceeded the standard 24-row VT console, causing dialog to
exit with code 1 and silently skip all apps. Make both heights
terminal-adaptive via tput lines/cols. Also extend the EXIT trap to
reset the terminal so Ctrl-C during a dialog doesn't leave the console
in raw/no-echo mode.
arch-autoinstall.sh, archbaseos-guided-install.sh: add a ping 1.1.1.1
check early in both scripts. In interactive mode, launches nmtui if
offline, then re-checks; prompts to abort if still down. Answerfile
mode logs a warning and continues.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Remove -s flag from read so the password is visible while typing,
enabling piped input to work visibly on the ISO installer.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Inside the chroot the host's udev manages /dev/hidraw* with permissions
scoped to live-system groups; the new user has none of them, so pamu2fcfg
timed out with "No FIDO authenticator found". Move enrollment to after
CHROOT_EOF where it runs as root on the live system, then fix ownership
using the new system's UID/GID.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
On any ERR, both installers now trap the failure, log the line/exit
code, and pop a dialog yes/no asking whether to send the log to another
system via croc. Falls back to a plain read prompt if dialog is absent.
Added dialog and croc to packages.extra so they are present in the live ISO.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add full session logging (tee to logfile) to archbaseos-guided-install.sh,
matching the pattern already in arch-autoinstall.sh; copy log to /mnt/boot/
at the end so it survives into the new system
- Add part() helper to both installers so NVMe/eMMC drives use the correct
'p' separator (e.g. /dev/nvme0n1p1 instead of the broken /dev/nvme0n11)
- Add disk size guard to arch-autoinstall.sh: fail early with a clear message
if ROOT_GIB would be < 8GiB instead of passing a nonsense value to parted
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
policy-scan-notify is now a FreeIPA *user* group instead of a host group,
so alert notifications follow the user to every enrolled machine. The
fetch-alerts timer is installed fleet-wide on any host where the group exists;
the profile.d snippet gates notification daemon start on runtime group
membership (id(1) / SSSD) so non-members log in unaffected.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
policy-block-binary-<name> is now a FreeIPA *user* group instead of a host group,
so restrictions follow the user to every enrolled machine. The PATH wrapper is
installed on all hosts and checks group membership at runtime via id(1)/SSSD,
passing non-members through transparently. __ in the group name decodes to .
so Flatpak app IDs are supported (flatpak run fallback included). AppArmor layer
removed since per-user confinement requires a different approach and the wrapper
alone is sufficient. Adds local_sudo_<username> host group policy which writes
a sudoers drop-in granting that user full sudo on the specific device, reverted
on group leave.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a new host group policy `no_local_users` that locks the passwords of root
and all local users (UID >= 1000) via `passwd -l`, ensuring only FreeIPA domain
accounts with centrally-managed sudo rules can authenticate and gain elevated
privileges. Leaving the group reverts by unlocking every account tracked in the
state file. Updates docs with group reference entry and Local User Lockdown section.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ansipa-smb-setup.sh:
- Adds KeyAdmin Linux group and luks-upload service account (member of
KeyAdmin) on the IPA container, both persisted across restarts.
- LUKS base dir /data/luks-keys owned root:KeyAdmin, mode 2750 (setgid
so new files inherit the group).
- New [ansipa-luks-keys] SMB share: valid users = @KeyAdmin, read only,
write list = luks-upload. Human admins gain read access by being added
to KeyAdmin: useradd -r -G KeyAdmin <user> && smbpasswd -a <user>.
- LUKS_KEY_UPLOAD_PASSWORD sourced from env / /data/samba/ansipa-smb.env
alongside the existing SMB_SCAN_PASSWORD.
collect-luks-keys.yml:
- After fetching /_LUKS_BACKUP_KEY from each client, uploads it to the
ansipa-luks-keys share via smbclient using a temp credentials file
(no_log, deleted in post_tasks).
- Local staging copy is removed after a successful upload.
- SMB credentials file uses an epoch-stamped path to avoid collisions.
.env.example: documents LUKS_KEY_UPLOAD_PASSWORD.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Host groups named policy-daemon-enable-<unit> and
policy-daemon-disable-<unit> are now matched by a wildcard case arm in
the group parser — no per-service configuration required.
Enforcement (every 30 min via existing timer):
enable: systemctl enable --now <unit>; state written to
/var/lib/ansipa-policies/daemon-enabled
disable: systemctl disable --now <unit>; state written to
/var/lib/ansipa-policies/daemon-disabled
revert: when a host leaves a group the opposite action is applied
on the next run (enable→disable, disable→enable)
conflict: unit in both lists is skipped with a warning
The .service suffix is optional — _svc_unit() appends it when the name
contains no dot, so all systemd unit types work as-is.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Installs lamco-rdp-server from AUR (native Wayland RDP server, Rust,
H.264/VA-API). Enables lamco-rdp-server.service as a systemd user
service. Wired into tui-install.sh alongside the existing rdp-client
and qemu entries.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
rdp-client.sh: installs Remmina with the FreeRDP and libvncserver plugins
for RDP and VNC sessions.
qemu.sh: installs the full QEMU/KVM stack (qemu-full, libvirt, virt-manager,
virt-viewer, dnsmasq, bridge-utils, edk2-ovmf, swtpm, vde2), enables and
starts libvirtd, auto-starts the default NAT network, and adds the user to
the libvirt and kvm groups.
Both modules are wired into tui-install.sh: count_steps, checklist,
confirmation summary, and run_module dispatch.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Adds a post-keymap action selection to launch.sh (Install vs Reset).
The reset routine (reset-arch.sh) unlocks LUKS via FIDO2 token and/or
passphrase, snapshots /etc credentials and config, wipes and recreates
the @ btrfs subvolume, reinstalls base packages via pacstrap, restores
auth files (passwd/shadow/pam.d/sudoers) and system config, then
regenerates the initramfs and GRUB menu from chroot. User home data is
preserved; ~/.config is cleared except Yubico/ auth keys so FIDO2 PAM
login continues to work. libfido2 added to packages.extra for live-env
token unlock support.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
ansipa-smb.service: WantedBy=multi-user.target (was smb.service) so the
setup service always runs at boot, not only when smb.service pulls it in
docker-compose.yml: add NetBIOS UDP ports 137/138 to match Dockerfile EXPOSE
and nmb.service being enabled
ansipa-smb-setup.sh:
- use printf '%q' when writing SMB_SCAN_PASSWORD to ansipa-smb.env so
passwords with spaces or shell-special chars are correctly quoted
- always write /etc/cron.d/ansipa-check-scans (remove the [[ ! -f ]] guard)
since /etc/cron.d is on the ephemeral container layer and is lost on
container recreation; the service runs on every start anyway
Dockerfile: add -e SMB_SCAN_PASSWORD and -p 445:445 to the quick-test comment
ansipa-fetch-alerts.sh: replace $NEW && log with [[ "$NEW" == true ]] && log
to avoid set -e ambiguity with the 'false' builtin
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Container (ansipa image):
- Add samba + cronie to Dockerfile; expose ports 445/139
- ansipa-smb-setup.sh: idempotent setup of smbd + scanupload user +
/data/scan-results/{archive,alerts}/ on every container start
- ansipa-smb.service: runs setup before smb.service on each boot
- ansipa-check-scans.sh: hourly cron on server; analyses archive logs for
ClamAV/rkhunter/chkrootkit findings and writes <host>/<date>.alert files
- docker-compose.yml: add SMB_SCAN_PASSWORD env var + port mappings
- .env.example: document SMB_SCAN_PASSWORD
Client (policy-security-scan):
- Scan script now uploads log to //ipa-server/ansipa-scans/archive/<host>/
via smbclient after each run
Client (policy-scan-notify — new policy group):
- ansipa-fetch-alerts.sh: root timer (10 min) downloads alerts from SMB into
~/administration/<hostname>/ for each active login session; deletes server
alert when user removes local file (acknowledgment)
- ansipa-scan-notify.sh: user daemon started via /etc/profile.d/ansipa-notify.sh;
sends notify-send every 10 min while *.alert files remain in ~/administration/
- deploy-ansipa-policies.yml: installs samba-client, deploys SMB creds file
(/etc/ansipa-smb.creds, 0600), and deploys both notification scripts
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Binary blocking now applies two layers:
1. PATH-priority wrapper in /usr/local/bin/ (existing)
2. Empty AppArmor profile in /etc/apparmor.d/ loaded in enforce mode
An empty AppArmor profile denies all access — the blocked binary cannot
load shared libraries and exits immediately with a permission error,
covering callers that use absolute paths and bypassed the wrapper.
AppArmor layer is skipped silently when apparmor_parser is not present,
and deferred with a warning if the real binary is not yet installed.
Profiles are unloaded and deleted when the host leaves the policy group.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Keymap selection was unreachable because user input ran after pacman/partition
steps that could fail under set -e. Move the entire user input block (kernel,
hostname, username, encryption, keymap) to before lsblk and drive selection.
Also remove the redundant live-env keymap section (launch.sh handles that).
Drop exec from .zlogin so quitting the installer returns to a bash shell
instead of ending the session.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
arch-autoinstall.sh was missing the keymap handling added to the guided
installer in the previous two commits, so booting the ISO in auto mode
(answerfile embedded) never called loadkeys and left the installed system
with no /etc/vconsole.conf.
- Add the same KEYMAPS array + selection logic to arch-autoinstall.sh
(AF mode reads .keymap, interactive mode prompts)
- Call loadkeys and export KEYMAP into the chroot
- Write /etc/vconsole.conf inside the chroot
- Add keymap dialog to generate-answerfile.sh so the field is populated
- Document .keymap in the arch-autoinstall.sh answerfile field list
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Both the live-environment prompt and the installed-system prompt now
loop over a single KEYMAPS array, so adding a new layout is a
one-line change.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Prompts for us/de keymap interactively; reads .keymap from answerfile in unattended mode. Writes /etc/vconsole.conf in chroot.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
.zlogin execs .automated_script.sh on login, which checks for /answerfile.json;
if present it runs the auto installer (passing the path), otherwise launches the
guided installer directly — no manual invocation needed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Qt: replace QT_STYLE_OVERRIDE/QT_STYLE_SHEET env vars with QT_QPA_PLATFORMTHEME=qt6ct +
QT_QUICK_CONTROLS_STYLE=Fusion; add cyberqueer Qt6 style plugin (QProxyStyle wrapping
Fusion with hardcoded dark palette); enable custom_palette in qt6ct.conf so qt6ct applies
the dark QPalette directly for both Qt Widgets and Qt Quick apps.
GTK: fix dark mode not applying — set gtk-application-prefer-dark-theme=1 in GTK3
settings.ini; add gsettings color-scheme=prefer-dark to install script (required by
libadwaita apps which ignore gtk-theme-name); add index.theme so the theme is recognized
by GTK theme discovery.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
