86 lines
4.0 KiB
Bash
Executable File
86 lines
4.0 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
# write-usb.sh — write the M-Archy ISO to a USB stick with a raw, block-level copy.
|
|
#
|
|
# WHY THIS EXISTS:
|
|
# The ISO produced by build.sh is an *isohybrid* image: the BIOS bootloader
|
|
# (isolinux) and its .c32 modules live at fixed offsets referenced by an MBR
|
|
# embedded in the first sectors. A block-level write (dd) reproduces those
|
|
# sectors exactly. Copying the .iso file onto a mounted USB, or using Rufus
|
|
# "ISO" mode / UNetbootin / similar "ISO-to-USB" tools, rewrites the layout and
|
|
# the firmware then fails at boot with: "failed to load ldlinux.c32".
|
|
# Writing the whole device verbatim is the only reliable method, and it boots
|
|
# on both BIOS (isolinux) and UEFI (systemd-boot) machines.
|
|
#
|
|
# USAGE:
|
|
# bash write-usb.sh <iso> <device>
|
|
# e.g. bash write-usb.sh ~/m-archy-out/m-archy-2026.06.26-x86_64.iso /dev/sdb
|
|
# Run with the ISO but no device to list candidate removable disks.
|
|
|
|
# -e: abort on error; -u: error on unset vars; -o pipefail: catch pipe failures.
|
|
set -euo pipefail
|
|
|
|
ISO="${1:-}"
|
|
DEV="${2:-}"
|
|
|
|
die() { printf '\n Error: %s\n\n' "$1" >&2; exit 1; }
|
|
|
|
# List whole disks so the operator can identify the USB stick. RM=1 marks a
|
|
# removable device, which is almost always the stick (and never the system disk).
|
|
list_disks() {
|
|
echo "Block devices on this machine (RM=1 means removable — usually your USB):"
|
|
lsblk -dn -o NAME,SIZE,TYPE,RM,MODEL \
|
|
| awk '$3=="disk" {model=""; for(i=5;i<=NF;i++) model=model (i>5?" ":"") $i;
|
|
printf " /dev/%-8s %7s RM=%s %s\n", $1, $2, $4, model}'
|
|
}
|
|
|
|
[[ -n "$ISO" ]] || { echo "Usage: bash write-usb.sh <iso> <device>"; echo; list_disks; exit 1; }
|
|
[[ -f "$ISO" ]] || die "ISO not found: $ISO"
|
|
if [[ -z "$DEV" ]]; then
|
|
echo "No target device given for ISO: $ISO"; echo; list_disks
|
|
echo; echo "Re-run as: bash write-usb.sh \"$ISO\" /dev/sdX"; exit 1
|
|
fi
|
|
|
|
# ── Safety checks (this operation is destructive) ─────────────────────────────
|
|
[[ -b "$DEV" ]] || die "$DEV is not a block device."
|
|
# Must be a whole disk, not a partition like /dev/sdb1 — dd to a partition would
|
|
# not produce a bootable stick and could corrupt an existing filesystem.
|
|
[[ "$(lsblk -dn -o TYPE "$DEV" 2>/dev/null)" == "disk" ]] \
|
|
|| die "$DEV is not a whole disk. Pass the disk (e.g. /dev/sdb), not a partition."
|
|
# Refuse the disk that currently backs the root filesystem — never overwrite the
|
|
# running system. PKNAME of the root source resolves the parent disk name.
|
|
_root_src=$(findmnt -no SOURCE / 2>/dev/null || true)
|
|
_root_disk=$(lsblk -no PKNAME "$_root_src" 2>/dev/null | head -n1 || true)
|
|
[[ -n "$_root_disk" && "/dev/$_root_disk" == "$DEV" ]] \
|
|
&& die "$DEV holds your root filesystem — refusing to overwrite the running system."
|
|
# A non-removable target is suspicious; warn but allow (some USB enclosures
|
|
# report RM=0). The explicit YES prompt below is the real safeguard.
|
|
[[ "$(lsblk -dn -o RM "$DEV" 2>/dev/null)" == "1" ]] \
|
|
|| echo "WARNING: $DEV is NOT flagged removable — make absolutely sure it is your USB stick."
|
|
|
|
echo
|
|
lsblk "$DEV"
|
|
echo
|
|
_size=$(lsblk -dn -o SIZE "$DEV")
|
|
_model=$(lsblk -dn -o MODEL "$DEV" | xargs)
|
|
echo "About to ERASE $DEV (${_size}${_model:+, $_model}) and write:"
|
|
echo " $ISO"
|
|
echo
|
|
read -rp "Type YES (all caps) to proceed: " _ans
|
|
[[ "$_ans" == "YES" ]] || { echo "Aborted."; exit 1; }
|
|
|
|
# Unmount any mounted partitions of the target so dd has exclusive access.
|
|
while read -r _part; do
|
|
sudo umount "/dev/$_part" 2>/dev/null || true
|
|
done < <(lsblk -ln -o NAME,TYPE "$DEV" | awk '$2=="part"{print $1}')
|
|
|
|
echo "Writing (block-level)…"
|
|
# bs=4M: large blocks for throughput; conv=fsync: flush to the device before dd
|
|
# exits so "Done" really means written; status=progress: live byte counter.
|
|
sudo dd if="$ISO" of="$DEV" bs=4M conv=fsync status=progress
|
|
# Final flush of any remaining kernel buffers for the device.
|
|
sync
|
|
|
|
echo
|
|
echo "Done — $DEV is now bootable (BIOS + UEFI)."
|
|
echo "Eject it safely (e.g. 'udisksctl power-off -b $DEV') before unplugging."
|