diff --git a/epson5kp-dipsettings.md b/epson5kp-dipsettings.md
index ae3a4dc..e4db792 100644
--- a/epson5kp-dipsettings.md
+++ b/epson5kp-dipsettings.md
@@ -52,3 +52,26 @@ the DIP Switches".
 | 3-6 | OFF | Forms with a label: invalid (disabled) | Factory default. Not printing on label stock. |
 | 3-7 | OFF | Skip binding: invalid (disabled) | Factory default. Not using bound multi-part forms. |
 | 3-8 | **ON** | Automatic tear off: valid (enabled) | Not the factory default. When the input buffer goes idle after a print, the printer auto-advances the paper just far enough to reach its built-in tear-off bar (minimal waste), instead of relying only on `txt2printr.sh`'s own form feed — which, in roll mode, feeds a full page length (11in, per SW3-1/3-2) forward on every single capture. Worth confirming on the actual hardware that this doesn't double-feed against the script's explicit form feed; the product info sheet doesn't document the exact timing interaction. |
+
+## Summary
+
+Only two switches need to move off their factory default — everything else
+stays OFF:
+
+- **2-4** — ON (forces Parallel interface, skipping interface auto-detect)
+- **3-8** — ON (Automatic tear off)
+
+| Switch | 1-1 | 1-2 | 1-3 | 1-4 | 1-5 | 1-6 | 1-7 | 1-8 |
+| --- | --- | --- | --- | --- | --- | --- | --- | --- |
+| Position | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
+
+| Switch | 2-1 | 2-2 | 2-3 | 2-4 | 2-5 | 2-6 | 2-7 | 2-8 |
+| --- | --- | --- | --- | --- | --- | --- | --- | --- |
+| Position | 0 | 0 | 0 | **1** | 0 | 0 | X | X |
+
+| Switch | 3-1 | 3-2 | 3-3 | 3-4 | 3-5 | 3-6 | 3-7 | 3-8 |
+| --- | --- | --- | --- | --- | --- | --- | --- | --- |
+| Position | 0 | 0 | 0 | 0 | 0 | 0 | 0 | **1** |
+
+`1` = ON, `0` = OFF, `X` = don't care (2-7/2-8 only matter in serial mode,
+which isn't used here).